Low consumption light board, with 12 LEDs and length L=280mm
Light board with 12 LEDs L=280mm
Price range: €15,00 through €67,00 _incl. VAT
Description
Lighting board for H0 scale coach lighting equipped with 12 LEDs and electronic control circuit of the absorbed current which allows an excellent level of brightness with a max absorption. of approximately 10/15 mA.
Operation in both analog mode (constant brightness) and digital mode.
The use of this board allows the creation of lighted trainsets of more than 10 carriages controlled directly by the decoder installed on the loco or pilot car, with a power consumption compatible with the current that can be delivered by most decoders without the need to install supporting relays.
The bar is prepared for the connection of an electrolytic capacitor (supplied), with charge control circuit for the reduction of current absorption when the capacitor is discharged. The capacitor has the function of reducing the flashing due to possible micro-interruptions of the voltage taken from the rails.
The brightness level is customizable and can be set to three different levels.
The board can also be sectioned to reduce its maximum length.
The board can be used in combination with our magnetic hooks with electrical conduit SKU 8-104101 to create a feed-through electrical conduit to carry the supply voltage to the light boards installed in the trainset carriages, avoiding the need to mount current pickups on each element.
The feed-through conduit can also be used to drive the light boards directly from the decoder installed on the locomotive or pilot car if present.
Dimensions: 280 x 9 mm (can be sectioned to a minimum length of 180 mm) and can be used on carriages up to 300 mm long.
Download PDF manual
